Parts & Accessories

The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

- A premium proprietary latex tire sealant formula featuring lightweight biodegradable ingredients; 119.6 grams for 4 ounces - Contains multiple shapes and sizes of solid particles called nanites which quickly seal holes up to 1/4 - Performs in varying

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

- Latex-based formula which can simultaneously inflate and seal most common punctures quickly - Works with tubes, tubeless, and tubular tires - Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster - Enough pressure to seat a tubeless tire onto a rim - Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles - Fills a 29 x 2.4 MTB tire up to about 29psi

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.