Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
The Speedplay Cleat Fastening Screw Torque Wrench provides the proper torque of 2.5Nm / 22 in-lbs. required when installing the 4mm Cleat Fastening Screws (8) used with all Speedplay road cleats. Includes a removable #2 Philips bit.
$17.00 - $40.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
The smartest, most convenient torque key now comes with bits to suit every need. Same great T-handle shape and reliable “click” when reaching the max torque. - Includes Hex 3/4/5, Torx T-20/25, and Philips #1 - 5nm max torque - Bit holder included
- Consumer grade water-based silicone bicycle polish - Safe on all parts including carbon - Protects against uv rays, water and dirt
The Chain Pig II hands-free chain cleaner will change the way you think about cleaning your chain. Just one use with Pedro's latest solvent-free degreasers and you too will become a believer just as so many riders and skeptical pro mechanics have. The Chain Pig II provides a simple, efficient, and effective way to clean the chain without making a mess or wasting valuable degreaser. Each element has been designed to outperform and outlast the competition. The upper and lower bodies are made from super-strong, chemical and impact-resistant plastic and new Chain Pig II features stainless steel button arms, along with other improvements, to further increase durability. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. The drag-free derailleur hook is a game-changer providing simple use, real hands-free operation, and alignment allowing seriously high run speeds that increase effectiveness and efficiency. The Chain Pig II has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and onto the chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning. - Pro-grade brushes and super absorbent sponge eat chain grime for breakfast, and are always hungry for more - Surgically enhanced with stainless steel hardware and body sculpting ready for epic drivetrain battles - Innovative quick-lock closure and drag-free derailleur hook for easy use and hands-free operation - Lean and mean, this hog requires only 1oz of degreaser
A clean bike is a happy bike! Keeping your bike clean is an essential part of bicycle maintenance, ensuring better performance, increased safety, easier repairs, increased life of all parts of the bike, and more fun on your next ride! Pedro's Pro Brush Kit offers a set of four unique brushes designed specifically to easily and quickly clean all parts of the bike. Made with the user experience and durability in mind, each brush's ergonomic handle fits well in your hand while offering unmatched durability. - Large Frame and Wheel Brush - Toothbrush; ideal for cogs, derailleurs, and chainrings - Cone brush for hard to reach spots - Parts cleaning brush for applying degreaser - Logo bag for storage and travel. - Perfect when paired with Pedro's degreaser and cleaner products (each sold separately)
$5.00 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
The HCW-16.2 is a combination 15mm pedal wrench and a chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip is compatible with 5–12 speed cassettes. The HCW-16 is 10.75" long (27.3cm).
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park's Folding Chain Tool is a heavy-duty tool-steel shop-quality chain tool that also folds for carrying in your pack or pocket for use on the road and trail. It's compatible with 9-, 10- and 11-speed chains. It also includes a folding peening anvil for Campagnolo 11-speed chains.
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.
The AWS-1 is one of Park's most-popular tools because it fits the most-turned bicycle bolts. It features 4, 5, and 6mm Allen wrenches in a Y shape for excellent leverage. Each Allen is vinyl coated for comfort.
Park's I-Beam Mini Fold-Up Screwdriver/Torx Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver and a T25 Torx tool (for disc-rotor bolts). The I-Beam conveniently fits in pockets and packs, too.
The I-Beam Mini Fold-Up Set includes 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. It's the perfect mini-tool to get you out of binds or make quick adjustments. And, it conveniently tucks into a pocket or pack.
The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool's Mini Fold-Up Hex Key Set is a diminutive version of Park Tools famous fold-up tools, featuring 3, 4, and 5mm hexes, a T25 Torx compatible bit, combo screwdriver, and a key ring holder, all in a tough composite case. 2.6 inches (66mm) long
$22.95 - $52.95
The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.
Page 1 of 2 Next page